Industry dynamics-

How to handle the unstable or incorrect dispensing volume of the dispensing machine, and how to ensure the dispensing effect

Methods to solve the problem of unstable and malfunctioning glue output of the dispensing machine, small tips and formal operating methods for controlling glue output of the dispensing machine, factors affecting glue output of the dispensing machine, how to deal with glue errors that occur during us...

042024-02

Reflow soldering operation process specification

The process specifications for reflow soldering are as follows:1. Operators must wear labor protection equipment, including fire-resistant welding suits, dust masks, anti slip shoes, etc.2. Operators must receive relevant safety training, understand the risks and measures of welding operations.3. Be...

012024-02

How much do you know about X-ray radiation?

X-rays are a type of electromagnetic wave that has always existed in our living environment. Visible light, infrared, ultraviolet, X-ray, and gamma rays are mixed together in the atmosphere, including signals received by mobile phones, signals from various frequency bands and bands, and transmitted...

012024-02

Exploration of dispensing defect detection technology based on machine vision

With the rapid development of industrial automation control technology and computer technology, industrial automation has penetrated into the production of various industries. Automatic dispensing machines have been widely used in industrial production, playing an important role in product connectio...

012024-02

How to reduce the lateral temperature difference of lead-free reflow soldering?

The temperature of lead-free reflow soldering is much higher than that of lead-free reflow soldering. It is difficult to adjust the temperature setting of lead-free reflow soldering, especially since the window of lead-free reflow soldering is very small. Therefore, controlling the transverse temper...

312024-01

X-ray CT mainly consists of the following three parts

X-ray CT (ICT) is computer tomography or computed tomography imaging. Although the theoretical and mathematical theories related to tomography were first proposed by J Radon proposed, but it only became a new imaging technology after the emergence of computers and their integration with radiology. I...

312024-01

Do the bottom filling process have any performance requirements for the dispensing machine?

What is the bottom filling process?The bottom filling process is to apply epoxy resin adhesive dots on the edge of the inverted chip, and through the capillary effect, the adhesive is sucked to the opposite side of the component to complete the bottom filling process. Then, the adhesive solidifies u...

312024-01

The role of temperature curve in reflow soldering

Reflow soldering is achieved by adjusting the temperature curve of the reflow soldering to achieve optimal reflow soldering results. The reflow soldering temperature curve intuitively reflects the temperature change process of the circuit board in the reflow soldering furnace. Welding without follow...

302024-01

The key performance indicators of industrial CT systems include the following two types

Industrial CT technology combines multiple technologies such as computer, automatic control, mechanical, optical physics, etc. It can ensure that the detected object obtains a cross-sectional image of the object without physical damage.Industrial CT systems typically consist of radiation sources, me...

302024-01