Industry dynamics-

Definition and precautions of deep analysis glue filling equipment

1. Gluing machine:Gluing machine, also known as spray glue machine, dispensing machine, gluing machine, etc., is an automated machine that specifically controls the fluid and drips, coatings, and seals the liquid onto the surface or inside the product. The dispensing machine is mainly used for the a...

292023-12

The Important Value of Vacuum Welding Technology

Welding is a common method of connecting different metal components. The welding rod is melted at a high temperature at the welding site, and after the welding rod cools and solidifies, different workpieces will be bonded together. However, under normal welding conditions, there are often many situa...

282023-12

The Development Trends of Industrial CT

Industrial CT (computed tomography) technology, as a non-destructive detection method, is constantly developing and advancing, but it also shows some obvious development trends:1. Improvement in resolution and speedWith the continuous advancement of technology, the resolution and scanning speed of i...

282023-12

What factors are related to the quality of dispensing and the dispensing machine?

The dispensing machine is mainly used for precise dispensing, coating, and dripping of glue, paint, and other liquids in the product process to the precise position of each product. It can be used to achieve marking, drawing lines, circles, or arcs. At present, manufacturers often use a dispensing m...

282023-12

What are the functions of each component of reflow soldering equipment?

The functions of each component of the reflow soldering equipment are as follows:1. Heating system: The heating system is the core part of the reflow soldering equipment, mainly consisting of preheaters, heaters, and coolers. Among them, the preheater is used to preheat the PCB board to a certain te...

272023-12

Overview of Industrial CT Testing Standards

Industrial CT is the abbreviation of industrial computer tomography imaging technology. The imaging method is to perform a cross-sectional scan of the workpiece and perform digital processing to provide a two-dimensional image of the true reflection of the internal structure of the workpiece. After...

272023-12

How to solve the problem of glue valve leakage in the fully automatic dispensing machine

A fully automatic dispensing machine with reliable quality and price has a high safety factor and great guarantee of accuracy in operation. It is a good helper for dispensing in the electronics industry. However, a fully automatic dispensing machine with good supply and service cannot guarantee to m...

272023-12

How to deal with reflow soldering waste gas

Reflow soldering exhaust gas treatment is an important environmental protection work. During the reflow soldering process, the generated exhaust gas usually includes harmful gases such as nitrogen oxides (NOx), sulfur dioxide (SO2), carbon monoxide (CO), etc. If these gases are discharged directly w...

262023-12

Is X-ray detection equipment suitable for SMT production line operations?

X-ray testing equipment is a precision testing equipment that can be used for testing in SMT production lines. X-ray testing equipment mainly consists of three parts: X-ray source, X-ray detector, and control computer. X-ray sources can generate a special type of X-rays that can penetrate matter, an...

262023-12