Industry dynamics-

The role of visual dispensing machines in the development of industrial dispensing technology

With the continuous improvement of industrial technology requirements, ordinary automatic dispensing machines are gradually unable to meet industrial needs. At this time, visual dispensing machines are gradually entering the view of manufacturers. With their high precision and fast dispensing effect...

042024-01

What is the reflow time for reflow soldering

Reflow soldering reflow time refers to the process in which the solder paste reaches its melting point and, under the action of its liquid surface tension and flux assistance, the liquid tin flows back to the component pins to form solder joints, allowing the circuit board solder pads and components...

032024-01

What are the advantages of industrial CT non-destructive testing?

What are the advantages of industrial CT non-destructive testing? The basic principle of industrial CT non-destructive testing is based on the special effect of radiation being weakened and absorbed in the object being tested, which is related to the absorption ability and properties of the substanc...

032024-01

Solution to Bubbles and Slow Flow during Gluing Process

Nothing is perfect and can lead to various problems, so we should know the causes and solutions to these problems. Similarly, the same applies to dispensing machines.Regardless of the type of dispensing machine, various problems may arise, such as slow flow rate and presence of bubbles. What should...

032024-01

According to what setting is the temperature curve for lead-free reflow soldering

The appearance of lead-free reflow solder joints is rough, with many pores, a large wetting angle, and no crescent shape, which is significantly different from lead-based solder joints. If measured by the original lead based inspection standards, it can even be considered unqualified, because lead-f...

022024-01

What are the types of splitters on the market and their advantages and disadvantages?

A PCB splitter usually refers to a PCB splitter, also known as a circuit board splitter.Splitting machines are widely used in the electronic product manufacturing industry. Due to the strong stress generated by traditional manual folding methods, which have a serious impact on product quality, manua...

022024-01

How to use the coating machine reasonably and effectively?

The optimal working state of the three proof glue coating machine can be adjusted from several aspects such as the needle selection, glue dispensing time, and dispensing pressure of the three proof paint coating machine.1. Selection of coating machine needles:The diameter inside the coating machine...

022024-01

Differences between reflow soldering machine and wave soldering machine

Reflow soldering machine and wave soldering machine are two commonly used soldering methods in SMT electronic product production, and their differences are:Reflow soldering machine: The reflow soldering machine heats air or nitrogen to a sufficiently high temperature and blows it towards the circuit...

292023-12

Industrial CT scanning: a revolutionary technology for non-destructive testing

Industrial CT scanning is an advanced non-destructive testing technology that is fundamentally changing the way industrial production and quality control are conducted. JEENOCE will provide a detailed introduction to the working principle, application areas, and advantages of industrial CT scanning,...

292023-12