Industry dynamics-

Application of UV three proof paint coating in the circuit board industry

UV glue is widely used in circuit board coating. Through the coating machine, which is an automated machine, UV glue is atomized. According to the process characteristics, it can be selectively or whole board coated, and then cured in a furnace to achieve the three prevention effects. Below, we will...

222024-01

How long is the circuit board reflow soldering time

How long is the welding time of the circuit board from entering the reflow furnace to coming out of the reflow furnace? This depends on the length of the reflow furnace you use, the length of the circuit board, etc., and also depends on the quality of your reflow furnace. You can't give this a d...

192024-01

What factors are related to the accuracy and error of industrial CT?

Industrial CT is used to measure the complex internal structure of a product and detect all faults within it, without dismantling the product at any one step. High-precision non-destructive inspection system provides technical support for manufacturers. The system generates 2D images by capturing X-...

192024-01

How is dispensing applied in the mobile phone industry

With the rapid development of technology, more and more areas of dispensing applications, more common is the field of mechanical hardware, automotive and parts, electronics and 3c manufacturing fields and so on. Among them, the application in the field of mobile phones can be said to be accompanied...

192024-01

There is a difference between lead and lead-free reflow soldering

Reflow welding is a common welding method, which can weld the circuit board pad and the patch components together to make it a whole. There are two kinds of reflow soldering and lead free, there is a big difference between them, JEENOCE electronics here to share the difference between reflow lead an...

182024-01

Industrial CT has many advantages over traditional detection methods

The measurement technology of industrial CT scan is based on the new measurement principle. Industrial CT is widely used in the field of non-destructive testing and material composition inspection. With the increasing demand for accurate measurement of the internal and external geometric characteris...

182024-01

Pay attention to the use of liquid dispensing

First of all, the size of the dispensing amount is usually considered that the size of the dot diameter should be half of the product spacing, so as to ensure that there is enough glue to bond the component and avoid too much glue. The amount of glue is determined by the length of time, and the actu...

182024-01

How to set the reflow transport speed

The adjustment of reflow transport speed directly affects the welding quality of reflow products. Usually the reflow transport speed setting should be determined according to the entire reflow temperature curve, the following JEENOCE to tell you how to set the reflow transport speed.1, from the poin...

172024-01

The DR detection system includes the following important components

The DR detection system consists of an electronic cassette, a scanning controller, a system controller, an image monitor, etc. It directly converts X-ray photons into digital images through the electronic cassette, and is a generalized direct digital X-ray photography. Narrowly defined, Direct...

172024-01