Industry dynamics-

What are the advantages of automatic dispensing machines compared to traditional manual dispensing

At present, some companies still use manual dispensing in the manufacturing process of electronic products. However, in the current electronic industry, especially 3C digital products, there is an increasing demand for short, thin, light, and small products, with higher production requirements. The...

272024-03

Methods for improving the quality and efficiency of reflow soldering

1. Choosing the appropriate solder paste: The choice of solder paste has a significant impact on the quality of reflow soldering. Suitable solder paste should be selected based on the material, size, and welding requirements of components and circuit boards. The alloy composition, flux, viscosity an...

262024-03

What are the methods for factory inspection of BGA defects after packaging?

Production and processing factories often cannot guarantee the qualification rate of electronic components produced. The most important thing is that for packaging enterprises like BGA, the cost of simply relying on post packaging testing to improve product quality after BGA packaging is relatively...

262024-03

The application of precision dispensing machines in the medical industry

Nowadays, people's lives cannot do without medical treatment. When they go to the hospital for treatment, they will use some medical equipment. The quality of some medical equipment is good or bad, and the quality of medical equipment also affects the accuracy of people's physical health exa...

262024-03

What factors should be considered when adjusting the temperature of a reflow soldering machine

The quality of reflow soldering is directly affected by the temperature control of the reflow soldering machine. The welding process window of reflow soldering is basically very small, so the control of lateral temperature difference is more important. So, what factors should be considered when adju...

252024-03

Can X-ray testing detect false soldering short circuits in the BGA soldered on the PCB?

PCBA has become an irreplaceable component in the electronic market, covering almost every electronic related industry. Its characteristic is to use circuit boards to process the many and chaotic circuits of the past, greatly reducing product size and pushing products to a more modern level. Of cour...

252024-03

The influence of adhesive viscosity on products in automatic dispensing machines

In the process of enterprise production dispensing, automatic dispensing machines have high viscosity of glue, small glue points, and are easy to draw. The automatic dispensing machine has a low viscosity of glue and a large glue dot, which may cause glue to seep into the product. Therefore, it is v...

252024-03

How to achieve better soldering results with lead-free reflow soldering

The temperature of lead-free reflow soldering is much higher than that of lead reflow soldering, and the temperature setting of lead-free reflow soldering is also difficult to adjust, especially because the process window of lead-free reflow soldering is very small, so the control of lateral tempera...

212024-03

X-RAY CT detects the internal structural circuit of the battery

Given that the quality of electronic products is increasingly valued, especially for batteries, poor battery quality can easily cause greater problems and even endanger the lives and property of users. Therefore, how to control the quality of battery products is also an urgent task for many customer...

212024-03