Industry dynamics-

What are the advantages of using an automatic dispensing machine compared to manual dispensing

The increasing automation of industrial products in today's mechanized industry has led to fewer job opportunities for people. However, automation can adjust the probability of errors to very low, greatly reducing its costs. Among them, automatic dispensing machines are a representative automate...

082024-07

What is the function of reflow soldering furnace

Reflow soldering furnace is a commonly used soldering equipment in the manufacturing process of electronic components. Its function is to solder pre installed electronic components such as chips, capacitors, resistors, etc. together with printed circuit boards (PCBs) after heating and pressure, form...

052024-07

The rise of X-ray non-destructive testing technology in the field of chip production

The current testing methods used in semiconductor chip packaging and assembly mainly include manual appearance inspection, flying needle testing, needle bed testing ICT, automatic optical inspection (AOI), and functional testing (functional testing instrument). However, these methods can no longer m...

052024-07

Calibration methods and precautions for automatic dispensing machines

After a long period of progress, the market situation is also in a relatively stable state. Automatic dispensing machines have been used in various fields, and the required adhesive receptors are also diverse. Therefore, when using items of different shapes and sizes, automatic dispensing machines m...

052024-07

How to solve the problem of card board in the reflow soldering furnace

In the daily reflow soldering process, there may be problems with card boards. In the face of this situation, timely and correct handling is very important. JEENOCE shares the reasons and solutions for card boards appearing in the reflow soldering furnace.The possible reasons for the occurrence of c...

042024-07

Differences between X-ray tubes and X-ray sources

The generation of X-rays requires three essential conditions, namely an electron source, an accelerating electric field, and a metal target (tungsten or molybdenum). When a high-speed electron flow is blocked by a substance, X-rays can be generated. Specifically, X-rays are invisible rays produced w...

042024-07

The characteristics and applications of LED dispensing machines

LED is a type of microelectronics, because the internal chip is fragile, only a few millimeters, it needs to be glued. By encapsulating the internal chip with glue, the service life is longer. Due to the small size of a few millimeters chip, high precision is required for the LED dispensing machine...

042024-07

How to reduce the generation of reflow solder beads on circuit boards

To reduce the generation of reflow solder beads, the following measures can be taken:1. Control the preheating temperature. The temperature during the preheating stage should be between 120 and 150 degrees Celsius, which can remove volatile solvents in the solder paste, reduce vibration on the compo...

032024-07

Does the X-ray tube assembly belong to a radiation source

Does the X-ray tube assembly belong to a radioactive source? The answer is negative.The X-ray tube assembly is a component that combines an X-ray tube with some peripheral parts. The peripheral parts usually have a lead cylinder that shields radiation, and if it is a rotating anode, there will also...

032024-07