Industry dynamics-

How to clean the glue dispenser?

The automatic glue dispenser may clog during glue filling, reducing the amount of glue, affecting the efficiency of glue filling, or causing mixing errors that affect the quality of glue filling. Or if the glue cannot be directly distributed, so the machine cannot be used, how can we avoid blockage...

082023-12

The role of oxygen in reflow soldering process

With the development of many electronic products towards small, light, and high-density directions, especially the widespread use of handheld devices, the existing component material technology T technology is facing severe challenges, thus obtaining opportunities for rapid development. The pitch of...

072023-12

Discussion on Industrial CT Detectors

The industrial CT system mainly consists of a radiation source system, a detection system, a mechanical scanning and control system, a data acquisition and transmission system, and a computer image processing system. The detection system is a key subsystem of industrial CT systems. The performance o...

072023-12

How to choose a suitable glue spraying machine?

Why do companies choose automation equipment and why do leather goods factories in packaging factories use spray glue machines? Due to the fully automatic glue spraying function, you can save 40% of glue, improve work efficiency by 65%, and the defect rate is more than 10 times lower than manual glu...

072023-12

Process parameters that affect the quality of reflow soldering

The process parameters that affect the quality of reflow soldering mainly include the following points: 1. Temperature curve; 2. Reflow soldering preheating; 3. Reflow soldering insulation area; 4. The reflow zone of reflow soldering; 5. JEENOCE will explain in detail the cooling stages of reflow so...

062023-12

The basic principle and application of X-RAY detection for QFN

1、 IntroductionX-RAY detection QFN (Quad Flat Non led) is a common type of electronic packaging widely used in various electronic devices. Due to its advantages such as miniaturization, high density, and high reliability, it has been widely used in fields such as automotive electronics, medical equ...

062023-12

Why is the three proof paint coating machine effective?

The process of three proof paint coating is very important because its particularity can play a comprehensive protective role to a certain extent, especially for some electrical related equipment, it can avoid danger and comprehensively improve the safety of use. The reason why manufacturers of thre...

062023-12

What is the difference between the preheating zone of wave soldering equipment and reflow soldering equipment

Both wave soldering equipment and reflow soldering equipment have preheating zones, so usually reflow soldering equipment can have many temperature zones, with an additional ten temperature zones. Wave soldering preheating zones are usually two to four. Why is this?1、 Several Suitable Preheating Zo...

052023-12

Industrial CT and X-ray Testing

In the field of non-destructive testing, there is a pair of brother schemes - industrial CT testing and X-ray testing, both of which use X-rays to detect the interior of objects. So, how is X-ray generated?From a scientific principle, X-rays are particle streams generated by the transitions of elect...

052023-12