Adhesive characteristics and usage precautions of fully automatic dispensing machine

Automatic dispensing machines are widely used in the domestic market automation and have become an important development plan in the high-tech development plan. The automatic dispensing machine is listed as a supporting technology for intelligent automation equipment because it involves safety, high-tech industrialization, and the development of cutting-edge technologies, which has attracted high attention to the automatic dispensing machine and will also bring huge business opportunities for the manufacturing and upgrading of automatic dispensing machines in Shenzhen.

The downstream industry of automatic dispensing machines has replaced manual operation in the application of equipment, which not only improves work efficiency but also enhances the quality and perfection of products. Glue characteristics and usage precautions of dispensing machine

1. UV glue, with good fluidity and slight wire drawing, pay attention to the light shielding from the container to the dispensing head;

2. Quick drying glue, good flow, no wire drawing, fast trajectory speed, pay attention to the distance from the needle to the dispensing surface of the product;

3. Silicone, poor fluidity, thick glue, slow trajectory speed;

4. Single component epoxy resin, also known as COB bonding adhesive, has poor fluidity and is easy to draw, requiring heating of the adhesive head and fixture board;

5. Hot melt adhesive;

6. Two component epoxy resin is used for handicrafts, and the adhesive AB ratio can be used for 3-4 hours with good fluidity. Pay attention to the usage time, as it is prone to curing and blockage, and the needle barrel and tip are often replaced;

7. Artworks are made of molded black glue, which is thick and has a brushed finish. Do not lift it up and try to complete it in one stroke.

The automatic dispensing machine equipment consists of the following systems, which control the flow rate and dispensing shape of the dispensing valve and dispensing needle; Continuous supply of feeding system; Control the dispensing time and direction of the dispensing controller; Complete the dispensing channel that perfectly matches the shape and requirements of the product; If it is a two-component automatic dispensing machine equipment, a two-component accurate measurement system needs to be installed; Two component adhesive mixing system.