How to effectively control the dispensing volume of the dispensing machine?

A dispensing machine, also known as a glue coating machine, a glue dripping machine, a glue dispensing machine, a glue filling machine, etc., is specifically designed to control fluids. An automated machine that drips and coats the fluid onto the surface or interior of the product, achieving three-dimensional and four-dimensional path dispensing, precise positioning, precise glue control, no drawing, no leakage, and no dripping. The dispensing machine is mainly used for precise dispensing, injection, application, and dripping of glue, paint, and other liquids in the product process to the precise position of each product. It can be used to achieve dispensing, drawing lines, circular or arc shapes.

The dispensing volume operation of fully automatic dispensing and dispensing machines is a constant research topic in the packaging industry. The amount and time of adhesive release have a significant impact on the quality of packaged products.

Automatic dispensing and dispensing machines use pistons to operate the amount of glue. The size and flow rate of glue are determined by the movement trajectory of the piston in the rubber cylinder. The piston achieves displacement in the rubber cylinder, and the rubber output also undergoes relative changes.

When operating the dispensing machine and dispensing machine to set the amount of glue produced during the operation process, the intention is to accurately operate the amount of glue produced, which can be achieved through accurate calculation and calculation. Packaging manufacturers always use electronic rulers to measure the movement trajectory of the piston, and then correctly convert the actual colloid volume and colloid ratio through system principles, ultimately obtaining the size of the colloid quantity.

For some requirements of automatic dispensing and dispensing machines, it is necessary to set each specific quantity through the system, that is, implicitly set the travel interval and trajectory of the piston. When the fluid in the hose is activated, operational skills can be used to synchronize the assimilation tube with other required liquids. Therefore, the density, size, and flow rate of the adhesive can be accurately determined, ultimately achieving the goal of accurately manipulating the amount of adhesive.