Industry dynamics-

The main uses and applicable fields of dispensing machine equipment

A dispensing machine, also known as a dispensing machine, a coating machine, or a drip machine, is a mechanical device that specifically controls fluids to penetrate or drip onto the surface of a product. With its fast speed and low sensitivity to adhesive viscosity, it replaces the hands of operato...

032024-07

What will happen if the reflow soldering equipment is operated improperly

If the reflow soldering equipment is operated improperly, it may lead to the following problems:1. Welding defects: Improper temperature control, insufficient heating time, or excessive operation can lead to defects during the welding process, such as incomplete welding or fracture at the welding si...

022024-07

What are the characteristics of X-ray detection optical machines?

1. XRAY detection optical machine function composite:With the rapid development of imaging technology, the new generation XRAY detection optical machine is no longer limited to simple imaging functions. It now has multiple composite functions such as perspective, analysis, and automatic operation. T...

022024-07

Introduction to the structure of semiconductor dispensing machine

The continuous upgrading of semiconductor products has also raised the performance requirements for dispensing equipment. The performance of dispensing equipment mainly depends on the design and control of the dispensing valve body, which is the core component of dispensing. The semiconductor dispen...

022024-07

How to determine the temperature and time range of reflow soldering

There are several ways to determine the temperature and time range of reflow soldering:1. Temperature measurement: Temperature measuring instruments can be used to measure the temperature of the reflow welding machine. Usually, the temperature sensor of the reflow soldering machine provides real-tim...

012024-07

What is the microfocal X-ray source among the types of X-ray sources?

Microfocus X-ray source, abbreviated as MFX, refers to an X-ray source with a focal size less than 20 microns.In X-ray detection equipment, X-rays emitted from a microfocal X-ray source pass through the sample and are then imaged by an X-ray flat panel detector. Due to the different penetration abil...

012024-07

What are the advantages of online spray dispensing?

In the past, factories and enterprises only had traditional dispensing machines. Although they could be used, their work efficiency, cost, and quality were not satisfactory. In such a situation, even if high-quality orders were obtained, it was difficult to complete. As a result, online spray dispen...

012024-07

How to improve the welding quality and reliability of reflow soldering?

Improving the welding quality and reliability of reflow soldering can be approached from the following aspects:1. Choosing the appropriate solder paste: Solder paste is the key material for reflow soldering. Choosing the appropriate grade and high-quality solder paste can help improve welding qualit...

282024-06

The principle of X-ray source producing X-rays

In X-ray sources, X-rays are mainly generated by electron bombardment of target materials, and there are two specific principles:1) When a high-speed electron collides with a target atom, it changes its original trajectory and slows down, while emitting X-rays with an energy equal to the energy diff...

282024-06