Advantages of curve dividing machine for manual dividing

Curve dividing machine, also known as milling cutter dividing machine, is different from other types of dividing machines. It mainly uses the high-speed rotating spindle to drive the milling cutter to divide the multi connected PCB boards with high precision according to the programmed road. There are also classification methods of off-line and on-line milling cutter dividing machines, as well as the classification of single workbench and double workbench.

Characteristics of PCB manual splitting:

1. It is easy to produce PCB delamination by manual splitting.

2. It also depends on the layout design of the product to decide whether to use machines or hands, but there are few layouts that use manual dividing boards now.

3. Because there is no need to align the blade and upper mold, the speed is slightly faster, but at the same time, the working intensity of the operators will increase a lot. In addition, manual plate splitting is easy to break the circuit inside the PCB, and manual plate splitting is easy to produce stress, resulting in the rupture of devices or solder joints. Manual plate splitting and scissors plate splitting are not recognized by large manufacturers, because the bending stress caused by plate splitting is too large, and the quality qualification rate of some manual plate splitting is low.

4. However, generally in small batches and with low quality requirements, manual production can be temporarily selected in consideration of economy.

The visual alignment curve dividing machine has milling cutter and cutter breaking induction, and its advantages are:

1. The whole series is equipped with a high-speed CCD visual automatic correction system, which greatly improves the cutting accuracy and operation efficiency.

2. Using high-speed spindle to cut PCB, the cutting stress is small, the precision is high, and it is suitable for circuit boards of any shape. The dual table motion can perform segmentation and circuit board placement at the same time, and the dual table can cut PCB boards of different shapes at the same time.

3. Improve operation efficiency; When the circuit board to be cut is too large, it can be combined into a workbench for use.

4. The upper ion fan prevents the adsorption of board dust caused by static electricity.

5. Table program design, CCD teach in program design, program design is intuitive and simple; Graphic display and setting when the cutting state is finished.

6. Real time tool breaking detection, fault and working status display.

7. Patented high efficiency, low noise, built-in dust collection device, saving valuable production space.

8. The PCB size can be customized according to customer requirements.