How to maintain the automatic PCB dividing machine

Full automatic PCB splitter is widely used in the electronic industry. From led to PCB board of mobile phone, it will use knife splitter, curve splitter or guillotine splitter, etc., and the use of splitter has certain operation requirements, which can not only quickly improve the cutting speed, but also avoid equipment damage and even personal injury caused by operation errors; In addition, we also need to carry out daily maintenance of the equipment to make the equipment work normally and efficiently. So, how to maintain the splitter?

1. For daily use, the power must be turned off after the work is completed.

2. When the full-automatic PCB splitter is used, the equipment shall be cleaned and maintained regularly. The specific operation method is to clean all parts with appropriate sprinkling essence and dilute the dust in its dust collection to ensure its clean use.

3. If the milling cutter of the full-automatic PCB splitting machine has abnormal vibration or sound during use, it needs to stop and check it. During the inspection, make sure that the power supply is turned off.

4. During cleaning and maintenance, pay attention to avoid alcohol and dirt falling into the spindle, so as not to affect its normal operation.

5. For the maintenance of the sliding rod and bearing of the full-automatic PCB splitting machine, it is necessary to add lubricating oil at an appropriate time at ordinary times. At the same time, the loose parts need to be tightened.

6. If the tool is damaged, replace it in time, and then add lubricating oil. Lubricant is the function of reducing friction and reducing equipment wear.