Characteristics and maintenance of milling cutter dividing machine

The professional machine for cutting circuit board is called dividing machine. There are many kinds of dividing machines, such as milling cutter dividing machine, guillotine dividing machine, laser dividing machine, etc.

There are many different types of circuit boards, and each type has its own purpose. In the process of practical application, we will find that different board splitting machines have different characteristics. What are the characteristics of milling cutter board splitting machine?

During the use of the milling cutter dividing machine, one principle is to realize the special purpose of the machine during the use. It is only used to cut the PCB board, and it will not hurt the PCB during the use. Not only that, in this process, we will find that the length of the cutting board can reach different specifications such as 100200 to 400, but we can also find that in the specific use process, It can make appropriate adjustment according to the required thickness of the plate.

Sometimes, in order to meet the work needs, the milling cutter dividing machine can also make a certain degree of adjustment according to its own actual needs in the actual operation process, but in the adjustment process, we found that the milling cutter can play a good wear resistance. Realize the effect and prolong the service life of the equipment to a certain extent.

1. Maintain the splitter regularly. After all materials are produced, the switch of the equipment needs to be turned off to stop the work. When the equipment temperature rises, do not cover the equipment with other consumables. When the equipment has completely dissipated heat, cover the consumables above the equipment to avoid dust entering the equipment.

Regular maintenance is also an important task to avoid dust entry, wipe and replace equipment lubricants and reduce equipment wear.

2. Before opening the milling machine, check the equipment. After the comprehensive inspection of the equipment, in the process of using the equipment, in order to achieve good operation.

When opening the device, please pay attention to whether the device plug is inserted, insert the plug, and then open the device.

3. When the milling machine is in operation, the operator should not leave the machine. Although the automation degree of the equipment is very high, in production, the operator still needs to constantly add equipment and manually produce auxiliary materials to improve the quality of material production.