Which PCB splitter can cut all kinds of PCB boards perfectly?

PCB circuit boards are different, the machines and equipment made by each consumer are different, and the types of PCB circuit boards are also different. Therefore, it is best to use different PCB distribution machines for different PCB circuit boards.

1. For those small, thin and very simple PCB circuit boards, it is strongly recommended to cut them with a guillotine PCB splitter.

The height of the upper cutter is adjusted by the screw jack structure. It has high precision, small friction, convenient operation and wear-resistant parts! The clearance between the cylinder and the connecting rod is 0. During plate cutting, the machine vibration is very small and the plate cutting stress is small. The upper and lower tool heights can be adjusted. The upper twist adjusts the tool clearance according to the thickness of PCB board to meet the thickness between V slots. No vibration and noise during cutting to prevent damage to precision parts. The blade can be grinded repeatedly to save the high cost of blade re purchase.

2. There are also PCB circuit boards containing electronic components. When the electronic components are not very high and the board is not very large, ps-3000 knife walking PCB splitter can be used.

The knife walking splitting machine is an off-line splitting machine, which adopts the method of upper round knife and lower straight knife. As for the PCB board, as soon as the upper switch of the lower straight knife is stepped on, the round knife moves horizontally to the set point, that is, the PCB board is cut and divided, the cutting does not fall off, and the incision is flat. The Omron infrared light curtain switch is used for safety protection. When the hand or foreign matter is in the knife movement area, the machine will stop working immediately to ensure the high-speed and safe operation of the machine. After soldering, the PCB board connecting multiple pieces will often damage the circuit or break electronic parts. Using this machine can avoid damage and improve work efficiency and quality. The machine is driven by stepping motor, which can be self-locking and accurate positioning when powered on. It solves the problem that the travel point of DC and AC motors changes after working for a period of time due to inertia

3. For these irregular PCB circuit boards, the curve off-line PCB splitter is used.

The automatic PCB dividing machine is a device that mainly uses the high-speed operation of milling cutter to divide the multi connected PCB boards according to the pre edited path. It replaces the cutting defects of manual breaking, c-cut or push, improves product quality and reduces scrap rate. The machine adopts man-machine interface WindowsXP operating system, concise and humanized interface design, automatic cutting path correction system, high-pixel CCD program production, block program and single-step program editing and modification, and PCB loading and unloading device with interactive work of two platforms, It can effectively reduce the opening time of the machine, so as to achieve the ideal production efficiency.

In a word, no PCB splitter can perfectly laser cut all kinds of PCB circuit boards. It is best to use different cutting machines for the performance of PCB circuit boards.