What should we pay attention to in the standardized operation of PCB splitter?

At present, there are different brands of PCB splitting machines in the market, and the demand of users for splitting machines is also increasing. So how to standardize the operation of the automatic dividing machine has become an urgent question for the majority of users., Therefore, the correct operation method of the distributor can make our whole operation process of the distributor more smooth. While improving the overall production efficiency, it can also improve the quality of our distributor, effectively improve the service life of the distributor equipment, and correctly grasp the use steps of the distributor can help us understand the distributor.

When we operate the distributor, we need to pay attention to the following points:

1、 Confirm the voltage and ensure that the power supply voltage is stable:

Before startup, we should not only check the automatic board splitter, but also confirm whether the power supply voltage of PCB board splitter is AC220V. After confirming the voltage, we will do the following.

2、 Turn on the power switch and find the correct position:

After confirming the power supply voltage, turn on the on position of the power switch. We know that the power switch is related to the overall operation of our board splitter.

3、 Grasp the itinerary and choose the appropriate itinerary:

How to correctly grasp the itinerary? In the selection of the dividing machine travel, our settings have specific settings: generally, there are 5 travel settings, namely 0, 100, 200, 300 and 400. Therefore, when splitting, we need to correctly select the appropriate travel, which can greatly improve our splitting efficiency.

4、 Height determined by plate thickness:

In general, the upper and lower height of the divider cutter should be determined according to the thickness of the plate, so we should accurately grasp our plate thickness and use the appropriate cutter.

5、 PCB splitting process:

The common process of automatic plate splitting machine is that the side groove of PCBA should be stuck at the position of the lower cutter of the plate splitting machine. At this time, we should stabilize the PCBA board with both hands, then gently step on the pedal with our feet and observe the position of the cutter., Until the cutter reaches the distance set at the beginning and stops automatically.