Can I use PCB for the visual splitter?

Visual splitter is a device that uses high-speed operation to separate multi connected PCB boards according to the pre edited path. It replaces the cutting defects of manual breaking, V-CUT or push, improves the quality of products and reduces the scrap rate. The machine adopts man-machine interface windows10 operating system, concise and humanized interface design, automatic cutting path correction system, DXF file import, high-pixel CCD program production, block program and single-step program editing and modification, and tool path optimization to make programming fast and convenient, Greatly reduce programming time.

Hardware advantages:

配置高像素CCD放大镜头，自动MARK点定位校正系统，移动路径有实时显示和模拟路线跟踪，显示一目了然，自动对位校正功能，切割精度更高，PCB只要在3mm之内的范围内放偏，机器视觉都可以进行自动路线校正，放宽了操作员在放板时精度的要求。大大提高了工作效率。

It is equipped with high-pixel CCD magnifying lens and automatic mark point positioning correction system. The moving path has real-time display and simulated route tracking. The display is clear at a glance. The automatic alignment correction function has higher cutting accuracy. As long as the PCB is placed within 3mm, the machine vision can carry out automatic route correction, which relaxed the accuracy requirements of the operator when placing the board. The work efficiency is greatly improved.

全封闭透明安全门，操作安全且便于观察。配置上离子风向下吹加强力吸尘过滤集尘器下吸尘方式，可干净解决切割粉尘问题。

Fully enclosed transparent safety door, safe operation and easy observation. Equipped with upwind and downwind blowing plus strong dust suction and filtering dust collector, it can clean and solve the problem of cutting dust.

刀具寿命监测，铣刀切割一段距离后会自动上升和下降至另一段未切割的刀刃位置，上下距离及次数可根据刀刃长度设定，以延长铣刀寿命。

Tool life monitoring: after cutting a certain distance, the milling cutter will automatically rise and fall to another uncut blade position. The up-down distance and times can be set according to the blade length to prolong the service life of the milling cutter.

配置优点：

Configuration advantages:

1、配置高像素CCD放大镜头，辅助程式示教及编辑功能，精度更高更精确，图像更清晰。方便区块程式和单步程式编辑及修改。

1. Equipped with high pixel CCD magnifying lens, auxiliary program teaching and editing functions, higher precision, more accurate and clearer image. Facilitate editing and modification of block programs and step-by-step programs.

2、更换铣刀方便，为您节省宝贵时间、提高生产效率;

2. It is convenient to replace milling cutter, which can save you valuable time and improve production efficiency;

3、两个独立控制双工作平台，减少等待时间、增加产能;亦可同时切割不同外形的PCB板;

3. Two independent control double working platforms to reduce waiting time and increase production capacity; It can also cut PCB boards with different shapes at the same time;

集尘装置：

Dust collection device:

上吸模组：切割时毛刷与吸尘口同步吸走粉尘。

Upper suction module: when cutting, the brush and dust suction port absorb dust synchronously.

工作台：下方的漏斗型抽风口，配合专用治具的最大的限度减少残留粉尘，风口设计铁网，避免异常掉落阻塞风口，头部配有离子风枪，消除静电集尘。

Worktable: the funnel-shaped air outlet below is matched with the special fixture to minimize residual dust. The air outlet is designed with iron mesh to avoid abnormal falling and blocking the air outlet. The head is equipped with ion air gun to eliminate electrostatic dust collection.

集尘器：内置的集尘袋，节省车间空间，多重设计保证优质的集尘效果。

Dust collector: the built-in dust collection bag saves workshop space, and multiple designs ensure high-quality dust collection effect.

软件优点：

Software advantages:

1.图标化窗口操作画面，易学易用

1. Icon window operation screen, easy to learn and use

2.采用教导采点的方式产生加工档，可进行单步调试。

2. The processing file is generated by teaching sampling points, and single-step debugging can be carried out.

3.程序的左右工作台可以复制、陈列、多角度连接板复制、单步跟踪修改功能、区块编辑修改功能，精确简化了程序制作的时间，提高编辑效率。

3. The left and right worktables of the program can be copied, displayed, copied from multi angle connecting plates, single-step tracking and modification function, block editing and modification function, which accurately simplifies the time of program production and improves the editing efficiency.

4.视觉补偿 Mark点识别，路径自动纠偏作用。

4. Visual compensation, mark point recognition and automatic path correction.

5.操作人性化：预先路径图样，动态跟踪显示加工过程，人工干预加工过程(暂停、继续、回工作零点等、急停等)

5. Humanized operation: advance the path pattern, dynamically track and display the processing process, and manually intervene the processing process (pause, continue, return to work zero, emergency stop, etc.)

6.做好程式后可以进行模拟测试以检测路径是否正确;

6. After completing the program, simulation test can be carried out to detect whether the path is correct;

7.按了开始功能后软体会弹出“是否已经模拟过路径”的对话框提示使用者检测切割路径，大大降低新手切坏PCB板的风险。

7. After pressing the start function, the software will pop up the dialog box of "whether the path has been simulated" to prompt the user to detect the cutting path, which greatly reduces the risk of novice cutting PCB.