What do I need to do for daily maintenance of the splitter?

The clamping and daily maintenance of the milling cutter splitting machine can only be done well in daily life, which also requires the attention of enterprise leaders. Formal operation standard documents for the clamping and daily maintenance of the milling cutter splitting machine equipment splitting machine milling cutters should be prepared, so that the operating staff can operate according to the standards.

As long as this standard is followed, the relevant costs of the enterprise will definitely be reduced, the quality of production can also be guaranteed, and the delivery time of customers can also be guaranteed. This can also be an example of management achieving benefits.

1. Select the correct main deflection angle.

2. Check the power and stiffness of the equipment to ensure that the required milling cutter diameter is available for the equipment.

3. Ensure the feed rate of each milling cutter to achieve the correct cutting effect when the chips are thick enough, thereby reducing the wear of the milling cutter.

4. Regularly maintain and clean the splitter.

5. Properly place the milling cutter and regularly check the position of the tool holder to ensure accuracy.

6. Choose a milling cutter diameter that is suitable for the width of the workpiece.

7. Use the correct milling tooth pitch suitable for the process to ensure that there is little vibration when the blade engages with the workpiece during the cutting process. On the other hand, when milling narrow workpieces or milling cavities, ensure that there is sufficient blade engagement with the workpiece.

8. Follow the rules for tool maintenance and repair, and monitor tool wear.

9. Minimize the impact of the milling cutter axis and workpiece position on the impact load as much as possible.