Industry dynamics-

Reasons for non melting of lead-free reflow solder paste

Leadless reflow soldering often leads to component deviation or component loss in SMD components. On the one hand, a small amount of solder paste is prone to drying out, and on the other hand, the quality of soldering flux in lead-free solder paste is also an important factor. Therefore, it is also...

072023-10

How to use X-ray to detect glue bubbles

Industrial X-ray testing equipment has a wide range of applications, such as lithium battery testing, circuit board industry, semiconductor packaging, automotive industry, circuit board assembly (PCBA) industry, etc., to observe and measure the position and shape of internal objects in packaging, id...

072023-10

Precautions for Cutting with Splitter

The curve dividing machine is a new type of dividing machine, which has the characteristics of compact structure and strong rigidity; Moreover, the operation of the dividing machine is simple and safe, and the mold replacement is convenient. But when using a curve divider, always pay attention to it...

072023-10

How to set the reflow soldering transportation speed

In the reflow soldering process of circuit boards, too fast or too slow reflow soldering transportation speed parameters can cause components to experience too long or too short heating time, resulting in the volatilization of soldering flux and changes in solder eating properties of solder joints....

272023-09

Analysis of Industrial CT and X-ray

In the field of non-destructive testing, industrial CT testing and X-ray testing both utilize X-ray to detect the interior of objects. Industrial CT, also known as industrial computer tomography imaging, can clearly, accurately, and intuitively display the internal structure, composition, material,...

272023-09

Why do companies choose intelligent splitters?

With the continuous changes and progress of technology, the productivity and development power of various industries are also constantly being optimized. Many industries play a great role in their development process through their optimization to a certain extent. Splitter is a widely used mechanica...

272023-09

Solution to the problem of solder beads in reflow soldering

Tin beads are one of the common defects in reflow soldering, and their causes are multifaceted, not only affecting the appearance but also causing bridging. Tin beads can be divided into two types: one type appears on one side of a chip component, often in the form of an independent large ball; Anot...

262023-09

How to choose between open and closed tubes for X-ray equipment?

Those who are familiar with X-RAY products should know that the core of X-RAY is the X-ray source and flat panel detector, and the X-ray source is divided into tubes and closed tubes. The requirements for the X-ray source vary in different scenarios. Generally, small electronic components can use cl...

262023-09

What are the advantages of offline board splitters for dividing circuit boards?

The reason why offline circuit breakers can replace traditional manual cutting of circuit boards is because they have many advantages that traditional cutting of circuit boards does not have. I believe everyone has an understanding of the traditional method of manually cutting circuit boards. So, le...

262023-09