Advantages and precautions of PCB splitter in SMT assembly line

Using PCB splitter on SMT assembly line can improve operation and production efficiency. The effect of traditional manual folding operation is poor. It is usually used in PCBA processing plants. This also adds two elements to operation and production. One is assurance, the other is quality.

1. PCB splitter is usually used in PCBA processing plants. Its purpose is to replace the traditional manual folding, improve production efficiency and ensure product quality.

2. At first glance, PCB dividing machine is more complex. You will feel dizzy. However, in practical applications, no matter what kind of circuit board is used, its application principle is not as complex as we think. In the practical application of PCB, there are mainly three types: single-sided PCB, double-sided PCB and Multilayer PCB. In terms of the number of sides, the structure of single-sided PCB circuit board is the simplest.

3. Of course, in addition to considering safety issues in the design and construction of the split machine manufacturer, in the actual operation process, employees should first carefully check the distance between the upper and lower cutters when turning on the power. When using the trigger of PCB distributor, it is strictly prohibited to stretch it into the machine. When the machine is running under any circumstances, do not remove the protective plate around the blade to avoid accidents. In addition, the PCB splitter only uses a daughter board. The splitter is only used as a daughter board and cannot be used for other purposes. In the whole process of use, electrostatic protection must be carried out, and operators must wear electrostatic rings.

4. When using the board splitter, the staff must place the PCB separation slot on the fixed tool rest, and then move the PCB separator horizontally. Do not wear loose clothes when operating the machine. Hair must be tied up to prevent accidents.

5. During boarding, the staff should pay attention to the maintenance work, pay attention to the protection of the upper and lower knife positioning plates and upper and lower blades, remove the sundries on the surface and inside of the machine, and check the machine screws at any time. The situation is tightening. If the machine does not work for a long time, remove the upper and lower locating plates and the upper and lower cutters to protect them by smearing oil, and wipe them clean before use. In addition, please check whether the wiring is damaged before using the machine.

6. In addition, daily inspection and maintenance must be carried out normally to check whether the blade is loose, so as to avoid accidents during operation. If the PCB splitter is abnormal and needs maintenance, first make sure that the power cord has been unplugged from the socket. Operate to avoid the danger of electric shock.