Preparation steps for operation process of dividing machine
Release time：2022-06-24Publisher:Jeenoce
With the rapid growth of the global demand for intelligent mobile equipment, the demand for PCB splitters has also increased. How to improve the production capacity and efficiency is a matter of great concern. Especially for fan-shaped, circular, semi-circular, irregular, polygonal, rectangular and irregular shapes. Improper manual breaking operation is easy to cause damage to the board, such as component cracking, damage to solder joints, board deformation, uneven force, PCB brittle fracture and cracking, and uneven board appearance.
At present, most enterprises have basically realized the mechanical plate splitting instead of manual plate breaking. Of course, in order to realize mechanical plate splitting, plate splitting machine is essential. Compared with manual breaking, it not only improves the production efficiency, but also greatly reduces the damage rate of products. Then, what are the preparation steps for the operation process of the dividing machine? Let's look at the operation process of the curve dividing machine:
1. check whether the equipment is powered on normally, and confirm that the equipment has been reset for operation;
2. the operator shall determine the direction and positive and negative directions of the PCB board, place the PCB board on the special fixture, press it gently with the palm of his hand, confirm that the PCB board has been placed, and put down the gland to ensure that the PCB board has been tightly covered;
3. use the visual camera to adjust the programmed cutting path and confirm to save;
4. press the start button, the curve dividing machine starts to work, the dust collector, spindle, electrostatic removal, etc. will also start automatically, and the milling cutter divides the plates according to the programmed cutting path;
5. complete the whole assembly and plate splitting, the workbench will exit automatically, open the gland, confirm that the cut PCB board is not damaged, manually remove the product, replace the new PCB board, cover the gland, and click the start button to perform the plate splitting action;
6. repeat step 4.5 until all products are cut.
