Common maintenance problems and methods of vacuum cleaner of milling cutter dividing machine

The vacuum cleaner of the dividing machine is a common cleaning tool on the dividing machine. It has a set of related support facilities. It can be used to collect waste products, filter and clean air in the production process of plate making machine, and can also be used together with auxiliary cleaning facilities. Connected with other auxiliary cleaning facilities, it can filter the dust and debris generated in the production process, so as to protect the health of the cleaner to a certain extent.

Due to the clean environment of the vacuum cleaner of the dividing machine, there are usually some small problems in the vacuum cleaner of the dividing machine. Here, we will teach you some common problems and maintenance methods of diaphragm vacuum cleaner, so that when the following problems occur, there is no need to find professional maintenance personnel for maintenance.

1. The work of vacuum cleaner is not enough.

Sometimes, the opportunity to vacuum feels laborious and not clean enough. The problem is simple. The dust collection bag is full or the hole in the bag is blocked, so the garbage cannot enter. At this time, the vacuum cleaner of the diverter should be removed, or the internal dust bag should be replaced, or the dust in the dust collector should be removed. Hoses should be clean.

2. The filter bag is blocked

Since the filter bag is easy to adhere dust, the dust collecting frame must be shaken frequently and the dust must be removed from the flannelette.

3. The problems in the parts of the vacuum cleaner and the vacuum cleaner of the plate splitting machine are the main problems that the vacuum cleaner of the milling cutter plate splitting machine has no vacuum.

First, check whether the fan of the vacuum cleaner of the board splitter is loose. If it is loose, tighten the fan. You can also add lubricating oil between the fans to make the fan rotate more smoothly. The seal between the top cover and the middle shell shall be tightened by screws.

In case of looseness, the gasket around the motor shall be replaced frequently and tightened in time.

4. The dust brush is loose or damaged.

If the mechanical brush of milling cutter plate splitter brand plate splitter is damaged, the motor will still rotate, but the suction of diverter vacuum cleaner will be weakened. At this time, the rotary brush shall be disassembled again, and the position of the rotary brush and unit shall be adjusted to make the bristles fully rub with the ground. In this way, the dust removal effect will be very good.