The maintenance times of the automatic milling cutter plate splitting machine can be reduced only when it is well maintained

In the long-term use and splitting process, the full-automatic milling cutter splitting machine will continuously lose the functions and performance of various parts. If it is not operated properly and does not follow the standard operation process of the machine, the failure of the full-automatic milling cutter splitting machine will increase, the chance of the full-automatic milling cutter splitting machine not operating normally will increase, which will have a lot of impact on production and shorten its service life, It will virtually increase the maintenance cost of automatic milling cutter plate splitting machine. If you can maintain the automatic milling cutter plate splitter at ordinary times, there will be less chance of failure, and the maintenance times of the natural plate splitter will be less, which will save the enterprise a certain cost.

What are the maintenance methods of full-automatic milling cutter dividing machine? Let's introduce it to you. I hope it will be of great help to your company.

1. If the milling cutter of the plate splitting machine of the full-automatic milling cutter type plate splitting machine has abnormal vibration or sound during use, it needs to stop and check it. During the inspection, make sure that the power supply is turned off.

2. When using the full-automatic milling cutter plate splitting machine, it should be cleaned and maintained first. The specific operation method is to clean all parts with appropriate sprinkling essence and dilute the dust in its dust collection to ensure its clean use.

3. Regular maintenance of plate milling machine. After all materials are produced, the switch of the equipment needs to be turned off to stop the work. When the equipment temperature rises, do not cover the equipment with other consumables. When the equipment has completely dissipated heat, cover the consumables above the equipment to avoid dust entering the equipment. Regular maintenance is also an important task to avoid dust entry, wipe and replace equipment lubricants and reduce equipment wear.

4. Before opening the full-automatic milling cutter plate splitter, check the equipment. After the comprehensive inspection of the equipment, in the process of using the equipment, in order to achieve good operation. When opening the device, please pay attention to whether the device plug is inserted, insert the plug, and then open the device.

5. For the maintenance of the sliding rod and bearing of the full-automatic milling cutter plate splitter, it is necessary to add lubricating oil at an appropriate time at ordinary times. At the same time, the loose parts need to be tightened.

6. When the full-automatic milling cutter plate splitting machine is operating, the operator shall not leave the machine. Although the automation degree of the equipment is very high, in production, the operator still needs to constantly add equipment and manually produce auxiliary materials to improve the quality of material production.

7. During cleaning and maintenance, do not drop any dirt into the spindle, because it is the core assembly of the automatic milling cutter plate splitter, so as not to affect its normal operation.