Difference between curve dividing machine and milling cutter dividing machine
Release time：2022-02-24Publisher:Jeenoce
Curve dividing machine is a kind of milling cutter dividing machine, which is different from other types of dividing machines. It uses the high-speed rotating spindle to drive the milling cutter
The high-precision segmentation of multi connected PCB boards according to the programmed road can be called milling cutter dividing machine.
It is quite different from the traditional hand breaking, knife walking, stamping and other machines, and has the following characteristics:
1. The curve dividing machine replaces the cutting defects of manual breaking, V-CUT or push, greatly improves the product quality and reduces the scrap rate;
2. When cutting with a milling cutter, the cutting stress is small, about 1% of the hand breaking type and 0.1% of the stamping type, which greatly reduces the hidden damage to PCBA board.
3. The milling cutter has high cutting accuracy, and the cutting surface is smooth without burrs. For customers with high product requirements, it is recommended to choose curve dividing machine;
4. The curve divider can cut straight lines, arcs, curves and oblique lines. Compared with the knife divider, aluminum substrate divider and light strip divider, it has higher flexibility and better applicability.
5. Now the labor cost is high, and people pay attention to unmanned automation everywhere. The traditional curve dividing machine still needs manual operation, which is inefficient.
6. When the traditional two station machine divides the board. In the process of switching to another station after cutting the PCB of one station, the suction of the vacuum cleaner will be reduced due to the switching station.
So at the last point, there is dust on the milling cutter and PCB board. In this way, many customers will add a blowing system outside the machine, so that employees will blow downwind when taking off the cut board. It greatly reduces the working time of employees, and the quality of PCB after cutting by milling cutter is not guaranteed.
