Advantages and matters needing attention of PCB splitter in SMT line

Using PCB splitters on SMT assembly lines can improve operation and production efficiency. The traditional manual folding operation is not good. It is usually used in PCBA processing plants. This also adds two elements to operation and production. One is assurance and the other is quality.

1. PCB splitter is usually used in PCBA processing plant. The aim is to replace traditional manual folding, improve production efficiency and ensure product quality.

2. At first glance, PCB splitters are more complex. There will be a feeling of dizziness. However, in practical application, no matter what kind of circuit board is used, its application principle is not as complicated as we imagine. In the practical application of PCB board, there are three main types: single-sided PCB board, double-sided PCB board and multi-layer PCB board. Single-sided PCB boards are the simplest in terms of the number of sides.

3. Of course, in addition to considering safety issues in the design and construction of split machine manufacturers, in the actual operation process, employees should first carefully check the distance between the upper and lower cutters when turning on the power. When using the trigger of PCB splitter, it is strictly prohibited to extend it into the machine. When the machine is running under any circumstances, do not remove the protection plate around the blade to avoid accidents. In addition, PCB splitters only use sub-boards. Splitters are only used as sub-boards and cannot be used for other purposes. Esd protection must be carried out and esd rings must be worn during the operation.

4. When using the board separator, the staff must put the PCB board separator slot on the fixed tool rest, and then move the PCB board separator horizontally. Don't wear loose clothes when operating the machine. Hair must be tied to prevent accidents.

5. During the boarding period, the staff should pay attention to the maintenance work, pay attention to protect the upper and lower knife positioning plate and upper and lower blade, remove the surface and internal debris of the machine, and check the machine screws at any time. The situation is tightening. If the machine does not work for a long time, it should also be removed from the upper and lower positioning plate and the upper and lower cutting knife to smear oil as protection, and wipe it clean before use. In addition, please check whether the wiring is damaged before using the machine.

6. In addition, perform routine checks and maintenance to check whether the blade is loose to avoid accidents during operation. If the PCB splitter is abnormal and needs repair, make sure that the power cord is removed from the socket first. Operate to avoid the danger of electric shock.