What are the methods to prolong the life cycle of the dividing machine?

The manual folding machine is widely used in electronic products, which will seriously affect the quality of electronic products. In the use of the plate splitting machine with round knife and straight knife, the wear and damage of the blade can be said to be more important, but how to prolong the service life of the plate splitting machine?

1、 The material of the dividing machine must have a certain hardness and toughness, and the heat treatment process must pass the test.

2、 Whether the design of the blade of the dividing machine is reasonable, the cutting depth, the numerical selection of the tool retraction angle and retraction angle must be determined according to the specific situation of the dividing machine.

3、 When the blade of the dividing machine is installed on the rotary cutting machine, the coaxiality and concentricity must be adjusted and controlled within a very small tolerance.

4、 The maintenance blade of PCB splitter must be operated correctly and adjusted before use. First try to cut several boards to see if they are smooth. Mass production cannot be carried out until the divider moves smoothly. If it is the normal wear of the dividing machine, it can be sent to the manufacturer for grinding and reuse.