Curve board machine operation process and basic function

Curve splitter is a new generation of Windows and doors manufacturing splitter, its main characteristics are compact structure, especially strong, simple operation, safety. Can replace more than one mold, and easy to change the mold. The lower die of the curve splitter is automatically in and out, and the product is easy to take and put, and the finished product can fall into the drawer. Greatly reduce the steel plate in the cutting process of the internal stress. Cutting semi-finished PCB,FPC is very efficient. Here is to understand the curve board machine operation process and the basic role of what?

A, curve board machine operation process

1 curve plate machine operator to determine the direction and positive and negative direction of the board, the board is placed on the special fixture, gently pressed with the palm, confirm the board has been placed, and then the board cover tight, everything is ready at this time. Operators left hand, right hand press the green button, the workbench automatically into the plate location, click on the software of the trigger button, check button to red, observe every cutting position is correct, check finished, workbench automatically exit, etc. After the inspection, some software on the stop button, this button is red, and after a few seconds will turn green.

2. After a series of detection is completed, the curve splitter officially begins to process. The operator presses the button on the software, and the splitter starts to work. When the cutting machine is working, attention should be paid to observe whether the cutting position is correct. If the cutting position is wrong, offset or not in the cutting position, there is a red stop button on the left and right of the cutting machine. At this time, as long as one of the buttons is pressed, the machine will stop immediately.

3. When the curve splitter is cutting THE PCB board, the table automatically exits. The cut PCB board is qualified.

Two, the basic role of curve board machine

1. Spatial trajectory. Free space trajectory movement (space straight line, arc; Hardware interpolation can realize fast linear, circular interpolation and various complex trajectory motion.

2. Parameter setting of curve splitter. Flexible control of speed, acceleration, input and output ports in the process.

3. Program curve splitter. Edit and teach input track parameter input, easy to operate.

4. Process preservation. Unrestricted preservation of multiple sets of processes with simple selection.

5. Customize the interface. A variety of I/O ports can be arbitrarily programmed.

6. Mode of operation. Optional single step or automatic machining.

7. Teach programming. Using the way of teaching to collect points to generate processing files, can be single step debugging.

8. Tool head setting. You can set the feed, retreat, open, shut down and delay of the tool at any point.

9. Quickly determine the trajectory. A single track can be processed repeatedly with different migration times through repeated track action.

10. Friendly interface. Simple Chinese Windows interface, with a standard window interface, interface simple simple beautiful, easy to learn and use.

11. Humanized operation. Display track diagram, dynamic tracking display processing process, manual intervention processing process (pause, continue, return to work zero, emergency stop, etc.)

12. Easy to operate. The design fully considers the simplification of use, without affecting the function of the case, so that the number of keys reduced, simplified the operation process, easy to operate personnel training, saving training time and training costs.

13. CAD import. CAD figure recognition: it can recognize CAD figure, automatically generate motion track, and teach with origin, which can meet the processing requirements of any plane products and save the tedious work of point sample teaching.

14. Make simple adjustments. It can adapt to the requirements of different height workpiece in a certain range, to ensure that there is no need to readjust the movement track when replacing the cutter head.

15 Visual correction Mark point recognition, path automatic correction.