Operation method of curve dividing machine and factors affecting service life

The curve dividing machine is mainly characterized by compact structure, strong rigidity, simple and safe operation. A variety of molds can be replaced, which is convenient to replace molds. Curve dividing machine, lower mold in and out automatically, easy to take out products. What are the operation methods of the curve dividing machine and the factors affecting its service life?

1、 Operation method of curve dividing machine

1. Determine the cutting direction and front and back sides and place them on the special fixture. When placing, press gently with the palm of your hand. After confirming the placement, close the cover of the daughter board clamp.

2. Press the left and right green buttons, the workbench will automatically enter the division position, click the software button of the curve divider, pay attention to the red button when viewing, and observe whether each position needs to be cut is correct. After acceptance, the workbench will exit automatically. After checking, click the stop button on the software. At this time, the button is red. Wait a few seconds and it's green.

3. After completing a series of inspections, the curve dividing machine starts processing. Click the button on the software, the splitter starts to work, and the dust collector, spindle and electrostatic precipitator will also open automatically.

4. Pay attention to whether the cutting position is correct when the curve dividing machine works. If the cutting position is incorrect, offset or not in the cutting position, there are red stop buttons on the left and right sides of the machine. At this point, just press one of them. The man-machine shall be shut down immediately, and the Engineer shall be asked to solve it after shutdown.

5. After cutting by the curve dividing machine, the workbench will exit automatically. If there are unqualified products, modify the path of the milling cutter to ensure that the cut products are qualified, take out the processed products and return to the fixture for processing.

2、 Factors affecting the service life of curve divider

1. Quality of curve divider. Quality is the basic guarantee for the service life of the board machine. Therefore, when selecting the curve divider, it is recommended to select the curve divider with good quality.

2. Use of curve divider. The operator must be familiar with the dividing machine and understand the normal use. In order to better extend the service life of the curve dividing machine.

3. Maintenance of curve divider. Under the high-speed operation of curve dividing machine for many years, small faults will inevitably occur. Therefore, the curve dividing machine should not only work, but also rest properly for proper maintenance.