On the related knowledge of double station curve off-line dividing machine

Curve off-line splitting machine is a machine used in the process of continuous splitting. The quality of traditional manual folding is uncontrollable, and there are hidden dangers for the work safety of folding personnel. However, due to the uneven force of manual folding and the difference of folding angle position, PCB electrical circuit, parts and tin track are damaged and components fall off, Copper foil deformation and plate falling off and other short service life and adverse phenomena.

Compared with the quality problem of traditional manual folding, the emergence of curve off-line dividing machine makes up for this disadvantage. The advantages of double station curve off-line dividing machine are particularly obvious. The double station curve off-line dividing machine has high work efficiency in production.

Functions of two station curve offline dividing machine:

1. The board splitting machine has the fastest board splitting efficiency in the whole industry, which is at least 15% faster than the ordinary board splitting machine on the market.

2. Equipped with NSK fast tool change spindle in Japan, the tool change does not need a special wrench, and the tool change is completed in two seconds.

3. Direct PCB scanning photo programming, which is more than twice as efficient as ordinary board splitting machine programming.

4. Tool life monitoring: after cutting a certain distance, the milling cutter will automatically rise and fall to another uncut blade position. The up-down distance and times can be set according to the blade length to prolong the service life of the milling cutter.

5. The full-automatic PCB splitting machine is a device that mainly uses the high-speed operation of milling cutter to divide the multi connected PCB boards according to the pre edited path. It replaces the cutting defects of manual breaking, c-cut or push, improves the product quality and reduces the scrap rate. The machine adopts man-machine interface WindowsXP operating system, concise and humanized interface design, automatic cutting path correction system, high pixel CCD program production, block program and single-step program editing and modification, and PCB loading and unloading device with interactive work of two platforms, It can effectively reduce the opening time of the machine, so as to achieve the ideal production efficiency.

6. The vacuum cleaner made of high-power imported fan and 10V high-voltage electrostatic elimination device have more ideal dust collection effect and less noise.

7. The left and right workbench copy, block copy, display, multi angle connecting board copy, one-step tracking and modification function and block editing and modification function of the program accurately simplify the time of program production and improve the editing efficiency.

8. The automatic mark point positioning correction system has real-time display and simulated route tracking of the moving path, which is clear at a glance. The automatic alignment correction function has higher cutting accuracy. As long as the PCB is biased within 3mm, the machine vision can carry out automatic route correction, which relaxes the accuracy requirements of the operator during board setting and greatly improves the work efficiency.

9. It is equipped with high-pixel CCD magnifying lens and auxiliary program teaching and editing functions, with higher precision and clearer image.