What are the characteristics of PCB single station curve dividing machine?
Release time：2022-01-17Publisher:Jeenoce
The single station curve dividing machine mainly uses the high-speed operation of milling cutter to separate the multi connected PCB board according to the pre edited path. It replaces the cutting defects of manual breaking, V-CUT or push, improves the quality of products and reduces the scrap rate. The machine adopts man-machine interface windows10 operating system, concise and humanized interface design, automatic cutting path correction system, DXF file import, high-pixel CCD program production, block program and single-step program editing and modification, and tool path optimization to make programming fast and convenient, Greatly reduce programming time.
1. It is equipped with high-pixel CCD magnifying lens and automatic mark point positioning correction system. The moving path has real-time display and simulated route tracking. The display is clear at a glance. The automatic alignment correction function has higher cutting accuracy. As long as the PCB is placed within 3mm, the machine vision can carry out automatic route correction, which relaxes the accuracy requirements of the operator when placing the board. The work efficiency is greatly improved.
2. Tool life monitoring: after cutting a certain distance, the milling cutter will automatically rise and fall to another uncut blade position. The up-down distance and times can be set according to the blade length to prolong the service life of the milling cutter.
3. Fully enclosed transparent safety door, safe operation and easy observation. Equipped with upwind and downwind blowing plus strong dust suction and filtering dust collector, it can clean and solve the problem of cutting dust.
4. The automatic mark point positioning correction system has real-time display and simulated route tracking of the moving path, which can be displayed at a glance. The automatic alignment correction function has higher cutting accuracy. As long as the PCB is biased within the range of plus or minus 3mm of the x.y axis, the machine vision can carry out automatic route correction, which relaxes the accuracy requirements of the operator during board setting. The work efficiency is greatly improved.
5. Provide CCD amplification teaching and DXF file import programming, which is convenient and fast. The program copying, block copying, array, multi angle connecting board copying, single step tracking and modification function and block editing and modification function accurately simplify the program making time and improve the programming efficiency.
6. A variety of cutting routes can cut straight lines, arcs and circles, greatly reducing the constraints on the substrate design.
