Analysis on the daily maintenance and repair of the dividing machine

When the PCB profession was not so prosperous, the PCB was divided manually, but the power of manual division was low, there were many rough edges on PCB, and the void rate was also high. Therefore, due to the needs of social development, the dividing machine came into being. Now let the distributor manufacturer and you briefly discuss the daily maintenance and maintenance of the distributor.

The operation principle of milling cutter plate splitting machine is to separate the data quickly and accurately through machinery, eliminate the burr of the data and reduce the invalidation rate of the data. With the changes of the times, there are more and more types of milling cutter board splitting machines, such as washing knife board splitting machine, walking knife board splitting machine, side knife board splitting machine, etc., which are widely used in mobile phone occupation, electronics occupation, led occupation, wire rod occupation, etc.

In the daily operation of the board splitting machine, it is inevitable that some losses will occur, so we should pay more attention to maintenance, which will reduce the losses and prolong the service life.

1. After work, remember to turn off the power. Before work, sort out the waste in the tools. Some small residues may cause damage to the parts of the dividing machine.

2. Scrub the dividing machine regularly. When the equipment looks shiny, people's work passion will be greatly increased. If customers participate in the factory, they will improve their impression.

3. If the machine does not work for a long time, disassemble the tool and apply the oil. When it needs to be used, wipe off the oil.

4. Always check the machine for shaking. Generally, this situation is caused by loose screws.