At present, there are several ways of PCBA segmentation in electronic manufacturing industry

1. The press is used with high speed, but it needs to make professional molds, with long cycle and high cost, and there is stress during stamping, which is harmful to SMD components;

2. When using V-CUT dividing machine, there are requirements in panel design. This equipment can only go straight line, and a special V slot needs to be designed in layout. Sparks will be generated during cutting, which will damage the board, and the cutting surface is not smooth and burr;

3. The quality can be imagined by using manual folding plate and file

4. The milling cutter type board splitter is used to cut the PCB circuit board, which has no limitations on the panel design, and can cut any shape, which can ensure the quality of the product

Milling cutter plate splitting machine, stamp hole plate splitting machine, milling cutter PCB curve plate splitting machine, also known as substrate cutting machine, substrate dividing machine, plate splitting machine, use high-speed rotating spindle, and use high-speed rotating milling cutter plate splitting machine for cutting It can cut the substrate after high-density inserts without V-CUT. The cover line (similar to the opening line of stamp hole) can cut the substrate safely and safely. It has the following characteristics:

1. The high-speed spindle is used to minimize the stress on the substrate during cutting It is about 1 / 10 of stamping type and 1 / 100 of hand breaking, so as to prevent chips such as ceramic capacitors from being damaged during cutting

2. High quality section obtained by using milling cutter plate splitter

3. Straight lines and arcs can be cut on the substrate, so the constraints on the substrate design are greatly reduced

4. Simple Cao operation, switching models (switching models: program switching, fixture switching)

5. The dust collector with strong force is used, so the dust produced by cutting is very little

6. The special cutting and milling cutter plate splitting machine is used to realize long cutting life Ming and reduce the flying of cutting dust

7. Compared with the stamping type, the operation cost is greatly reduced