The difference between automatic glue dispenser and automatic dispensing machine

1. Different glue control methods: Currently, most automatic dispensing machines on the market mainly rely on air pressure to control the amount of glue produced. Of course, there are also some automatic dispensing machines that do not require air pressure control. The automatic glue dispenser mainly relies on a metering pump to control the amount of glue produced. There are mainly gear pumps (mainly used for unfilled glue), screw pumps (mainly used for filled glue, wear-resistant), and plunger pumps (also known as ceramic pumps, super wear-resistant, but expensive) on the market. Therefore, when choosing an automatic glue filling machine, we should consider which pump is most suitable based on our own product and the performance of the glue used. JEENOCE will recommend high-quality and low-cost equipment to customers based on their actual needs.

2. The amount of glue dispensed varies: Relatively speaking, the minimum amount of glue dispensed by automatic dispensing machines is greater than that of dispensing machines, with a maximum dispensing amount of 10-20 grams per second or more. However, the amount of glue dispensed by automatic dispensing machines is smaller, with some dispensing machines having a minimum dispensing amount of 0.001g.

3. Different dispensing accuracy: The dispensing accuracy of automatic dispensing machines is higher than that of automatic dispensing machines

4. Different applicable adhesives: In general, automatic glue filling machines are mainly suitable for two-component AB adhesives, such as silicone, epoxy resin, crystal glue, polyurethane, etc; Distributors are mainly used for single component adhesives, such as UV glue, epoxy (black glue), white glue, EMI conductive glue, quick sol, silver glue, red glue, etc., as well as solder paste, heat dissipation paste, anti solder paste, transparent paint, screw fixing agent, etc. Of course, due to technological progress in recent years, automatic dispensing machines are no longer limited to single component adhesives, and there are many distributors that can be used for two component adhesives.

The glue dispenser, also known as the AB type glue dispenser, is an automated machine that can control the flow, dripping, gluing, and sealing of liquids on the surface or inside of a product, thereby achieving functions such as sealing, fixation, and waterproofing. Generally, two-component adhesive is used.

The dispensing machine, also known as the glue applicator, drip machine, etc., is specifically designed to control liquids. The fully automatic dispensing machine can achieve three-dimensional and four-dimensional path dispensing, precise positioning, precise control of glue, no glue extraction, no glue leakage, and no dripping. The automatic dispensing machine is mainly used for liquids such as glue and paint in the production process. It can accurately point, inject, spray paint, and drip to the precise location of each product. It can be used for points, drawing lines, circles, or arcs.