How to improve the effectiveness of the dispensing machine?

The accuracy, stability, and precision of the instrument during the use of precision dispensing valves can all affect the dispensing effect, and the quality of the glue used during dispensing may not meet the standard or the glue may not be suitable, resulting in relatively poor dispensing effect. Therefore, in order to improve the dispensing effect in actual operation, it is necessary to make better improvements based on these reasons. Below are several methods that can enhance the dispensing effect.

1. Maintain instrument and product level stability

Since the stability performance of the instrument during the production process can also affect the dispensing effect, a detailed check of the horizontal stability of the instrument before starting the operation can avoid this problem. Normally, it is recommended to place precision dispensing equipment and products at the same level to ensure more accurate dispensing. Because when the instrument and product are on the same horizontal line, the angle of dispensing will not be affected by external interference and there will be errors, which can ensure that dispensing achieves excellent results.

2. Heat the glue before dispensing to improve the smoothness of dispensing

The effectiveness of dispensing can also be directly affected by the glue, such as in colder weather conditions where the glue becomes more viscous. If such a viscous glue is used for dispensing, significant obstacles will inevitably be encountered, such as poor squeezing or semi-solid appearance of the glue. Heating the glue to an appropriate temperature before dispensing can effectively alleviate this phenomenon, which has a good effect on improving the dispensing effect and quality. At the same time, after each use, the remaining glue inside the needle should be cleaned up to avoid affecting the dispensing process.

Enterprises all want to further improve the quality of instrument dispensing, but many operators do not know the specific reasons that will affect the dispensing effect of the instrument. The above two methods for improving the dispensing effect have been validated over a long period of time and are extremely easy to operate and have outstanding effects.